AJA D10CEA SDI Mini Converter

The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.

• Digital to Analog Audio and Video Converter
• SDI with Embedded Audio Input
• Component or Composite Video Outputs
• 4 Channel Balanced Audio Output
• 2 Re-Clocked, Loop-Thru SDI Outputs
• Selectable Audio Channel Pair/Group

• Inputs: SDI (SMPTE 259M) w/Embedded Audio, 1x BNC
• Outputs:
  Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
  Audio: 4 Channel Balanced/Unbalanced
  Video/Audio Outputs on 25 Pin D Connector
  2 SDI Re-Clocked Loop-Thru, 2x BNC
• Frequency Response: Video, +/- .25dB to 5Mhz, Audio, +/- .5dB to 20Khz
• User Controls:
  External Dipswitch
  Video Format
  Pedestal
  H/V Blanking
  Audio Group 1 - 4
  Audio Level (adjustable via switch selection): S/N A15212 and above: +24, +18, +15, +12 dBu S/N below A15212: -14, 0, +2, +4 dBu
• Power: 5VDC Regulated, 4 Watts
• Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)